Valor Legend G4 780IN Installation & Operating Instructions Manual page 30

Time
To set the time, follow the steps below.
1. The display indicates °C/24-hour or °F/12-hour clock. To change from one to the other, press
2. To set the time, hold down both the
3. Quickly press the
4. Press the OFF button to return to manual mode or simply wait and it will automatically return
Temperature
Use this setting when you come in and want to enjoy a set temperature.
1. Select either the ☼
2. Hold the SET button until the TEMP display flashes.
3. Set the desired temperature with the
4. Press the OFF button or simply wait and the display will go to the temperature control mode.
5. The display must remain in TEMP mode on the remote handset.
30
Remote Control Operation
and hold both the OFF and
button to set the hour and the
Note: You must start setting the time while the display is flashing. If it stops flashing, go back to 2.
to Manual mode.
hours minutes
MODE or the ☽
temp
Note: 4.5°C/40°F is the minimum temperature setting.
Note: If you would like the Nighttime Setback temperature control to turn off, decrease the
☽
MODE setting until [---] appears on the display.
temp
Your fireplace will reach the set temperatures and the remote handset will check the
temperature every five minutes, adjusting the amount of fuel needed to give you a steady,
even heat.
buttons until the display changes.
and buttons until the display flashes. Let go.
button to set the minutes.
MODE by briefly pressing the SET button.
temp
or the buttons.