Elevating Footrests; Height Adjustment; Elevating The Footrests; Electric Footrests - Otto Bock B 600 Instructions For Use Manual

Options
12.4

Elevating Footrests

12.4.1 Height Adjustment

By loosening the screw at the footrest hanger, the footrest height can be adjusted to
suit the individual lower leg length and compensate for the seat cushion height you
use. There are five threaded holes in the footrest hanger for realization of the five
positions of height adjustment.

12.4.2 Elevating the Footrests

Either apply a light pressure to the footplate and raise the leg or raise the footrest by
hand to the required height.
After you have reached the desired height, the footrests will engage under weight
bearing in one of the ratchet points.
To release the footrest lock, slightly lift the footrest and depress the lever located on
the outside of upper footrest pivot point.
When you let go of the release lever, the footrest will engage in the next ratchet
position.
12.5

Electric Footrests

To avoid permanent pressure loads, the B600 offers the possibility for mounting
electric footrests (fig. 29).
In the control's additional function menu, you can operate the right and left footrest
separately as well as both at the same time.
82
Note!
Snugly re-tighten all screws and nuts.
Fig. 29: Electric footrests
B600 – Instructions for Use