B Footrests - Otto Bock Start M1 Intro Service Manual

4.B - Footrests
Replacing the footrests with footrest holders
Insert the footrest holders – in outwards turned
position (approx. 30°) – from above into the footrest
receivers.
Turn the footrest holders to the front until the swivel
segment engages with the lock.
For disassembly, please proceed in reverse order.
All footrests fit into the receiver without having to ex-
change any parts.
Replacing the pivot bearing
Loosen and remove the screw and remove the pivot
bearing.
For reassembly, please proceed in reverse order.
Use new screws coated with thread lock.
Replacing the footrest receiver
Loosen and remove the two screws and remove the
footrest receiver from the frame.
For reassembly, please proceed in reverse order.
Use new screws with thread lock.
Replacing the swivel segment
Remove the footrest holder from the frame.
Loosen the set screw on the inner side of the swivel
segment and remove the footrest bar by pulling it
downwards.