Care & Cleaning - Kenwood FPM250 series Instructions Manual

care & cleaning
G
Always switch off and unplug before cleaning.
G
Handle the blades and cutting disc with care -
they are extremely sharp.
G
Some foods may discolour the plastic. This is perfectly
normal and won't harm the plastic or affect the flavour of
your food. Rub with a cloth dipped in vegetable oil to
remove the discolouration.
power unit
G
Wipe with a damp cloth, then dry. Ensure that the interlock
area is clear of food debris.
G
Don't immerse the power unit in water.
G
Store excess cord in the storage area at the back of the
power unit .
liquidiser/mill
1 Empty the goblet/jar, unscrew the liquidiser blade unit by
turning to the unlock position
2 Wash the goblet/jar by hand.
3 Remove and wash the sealing ring.
4 Don't touch the sharp blades – brush them clean using hot
soapy water, then rinse thoroughly under the tap. Don't
immerse the blade unit in water.
5 Leave to dry upside down.
twin beater geared whisk
G
Detach the beaters from the drive head by gently pulling
them free. Wash in warm soapy water.
G
Wipe the drive head with a damp cloth, then dry.
Do not immerse the drive head in water.
all other parts
G
Wash by hand, then dry.
G
Alternatively they are dishwasher safe and can be washed
on the top rack of your dishwasher. Avoid placing items on
the bottom rack directly over the heating element. A short
low temperature (Maximum 50°C) programme is
recommended.
item
main bowl, lid, pusher
knife blade, dough tool
detachable drive shaft
disc
whisk beaters
Do not immerse the drive head in water
citrus juicer
liquidiser goblet, lid, filler cap
glass mill jar
blade unit and seal for liquidiser and mill
spatula
to release.
suitable for
dishwashing










service & customer care
G
If the cord is damaged it must, for safety reasons, be
replaced by KENWOOD or an authorised KENWOOD
repairer.
G
If you experience any problems with the
operation of the processor, before calling for
assistance refer to the troubleshooting guide.
If you need help with:
G
using your appliance or
G
servicing or repairs
G
Contact the shop where you purchased your appliance.
G
Designed and engineered by Kenwood in the UK.
G
Made in China.
IMPORTANT INFORMATION FOR CORRECT
DISPOSAL OF THE PRODUCT IN ACCORDANCE
WITH EC DIRECTIVE 2002/96/EC.
At the end of its working life, the product must not be disposed
of as urban waste.
It must be taken to a special local authority differentiated waste
collection centre or to a dealer providing this service.
Disposing of a household appliance separately avoids possible
negative consequences for the environment and health deriving
from inappropriate disposal and enables the constituent
materials to be recovered to obtain significant savings in energy
and resources. As a reminder of the need to dispose of
household appliances separately, the product is marked with a
crossed-out wheeled dustbin.
7