English - Kenwood FPM250 series Instructions Manual

safety
G
Read these instructions carefully and retain for future reference.
G
Remove all packaging and any labels.
G
The blades and discs are very sharp, handle with care. Always hold by
the finger grip at the top, away from the cutting edge, both
when handling and cleaning.
G
Do not lift or carry the processor by the handle - or the handle may break
resulting in injury.
G
Always remove the knife blade before pouring contents from the bowl.
G
Keep hands and utensils out of the processor bowl and liquidiser goblet
whilst connected to the power supply.
G
Switch off and unplug:-
G G
before fitting or removing parts;
G G
when not in use;
G G
before cleaning.
G
Never use your fingers to push food down the feed tube. Always use the
pusher/s supplied.
G
Never fit the blade unit to the power unit without the
liquidiser goblet or mini chopper/mill.
G
Before removing the lid from the bowl or liquidiser from the power unit:-
G G
switch off;
G G
wait until the attachment/blades have completely stopped;
G G
be careful not to unscrew the liquidiser goblet or mill jar from the blade
assembly.
G
SCALD RISK: Hot ingredients should be allowed to cool to room
temperature before blending.
G
Do not use the lid to operate the processor, always use the on/off speed
control.
G
This appliance will be damaged and may cause injury if the
interlock mechanism is subjected to excessive force.
G
Always unplug your food processor when not in use.
G
Never use an unauthorised attachment.
G
Never leave the appliance unattended when it is operating.
G
Never use a damaged appliance. Get it checked or repaired: see 'service
& customer care'.
G
Never let the power unit, cord or plug get wet.
G
Don't let excess cord hang over the edge of a table or worktop or touch
hot surfaces.
G
Do not exceed the maximum capacities stated in the recommended
speed chart.
2