Centrifugal Juicer; Care And Cleaning - Kenwood FP540 Series Manual

centrifugal juicer

Use the centrifugal juice for making
juice from firm fruit and vegetables.
pusher
lid
strainer
inner bowl
to use the centrifugal
juicer
1 Fit the drive shaft and bowl onto the
power unit.
2 Lock the strainer into the inner bowl
.
3 Fit the inner bowl into the processor
bowl .
4 Place the lid onto the bowl
clockwise until the interlock tab aligns
with the line on the outlet cover.
5 Cut the food into small pieces to fit the
feed tube.
6 Switch on and push down evenly with
the pusher - never put your
fingers in the feed tube. Process
fully before adding more.
7 After adding the last piece, let the
machine run for a further 20 seconds to extract all the juice from
the strainer.
important
G
If the processor vibrates, switch off and empty the strainer (The
processor vibrates if the pulp becomes unevenly distributed).
G
Process small amounts at a time (450g maximum) and empty
the strainer and inner bowl regularly.
G
Before processing remove stones and pips (eg pepper, melon,
plum) and tough skins (eg melon, pineapple). You don't need to
peel or core apples and pears.
hints
G
Use firm, fresh fruit and vegetables.
G
Citrus juice will be bitter and frothy because its peel and pith get
processed too. Use the citrus juicer instead.
- turn
k
KENSTORE™ attachments carousel
28
Your food processor is supplied with an attachment storage
carousel that fits inside the bowl.
to use the storage carousel
1 Fit the knife blade to the bowl.
2 Then fit the whisk, discs and canopy into the carousel
3 Fit the carousel over the knife blade and place the processor lid
on top
care & cleaning
G
Always switch off and unplug before cleaning.
G
Handle the blades and cutting discs with care - they are
extremely sharp.
G
Some foods may discolour the plastic. This is perfectly normal
and won't harm the plastic or affect the flavour of your food. Rub
with a cloth dipped in vegetable oil to remove the discolouration.
power unit
G
Wipe with a damp cloth, then dry. Ensure that the interlock area
is clear of food debris.
G
Wrap excess cord around the bracket at the back of the
appliance.
liquidiser/mill
1 Empty the jug/jar before unscrewing it from the blade unit.
2 Wash the jug/jar by hand.
3 Remove and wash the sealing ring.
4 Don't touch the sharp blades - brush them clean using hot
soapy water, then rinse thoroughly under the tap. Don't
immerse the blade unit in water.
5 Leave to dry upside down.
twin beater geared whisk
G
Detach the beaters from the drive head by gently pulling them
free. Wash in warm soapy water.
G
Wipe the drive head with a damp cloth, then dry. Do not
immerse the drive head in water.
all other parts
G
Wash by hand, then dry.
G
Alternatively they can be washed on the top rack of your
dishwasher. A short low temperature programme is
recommended.
6
.