Download Print this page

Care And Cleaning; Service And Customer Care - Kenwood Triblade Hdp109Wg Instructions Manual

Advertisement

Available languages

Available languages

B
to use the chopper (if
supplied)
You can chop meat, vegetables,
l
herbs, bread, biscuits and nuts.
Do not chop hard foods such as
l
coffee beans, ice cubes, spices or
chocolate - you will damage the
blade.
1 Remove any bones and cut food into
1-2cm (
-1") cubes.
1
2
2 Fit the rubber ring base
the bottom of the chopper bowl.
(This stops the bowl sliding on the
worktop.)
3 Fit the chopper blade over the pin in
the bowl
.
3
4 Add your food.
5 Fit the chopper cover, turn and lock
.
4
6 Fit the power handle to the chopper
cover
- turn clockwise to lock.
5
7 Plug in. Hold the bowl steady.
Then press the Turbo button.
Alternatively press the Turbo button
in short bursts to achieve a pulsing
action.
8 After use, unplug and dismantle.
optional attachment (not
supplied in pack)
Mini chopper - refer to "service and
customer care" section to order.

care and cleaning

Always switch off and unplug before
l
cleaning.
Do not touch the sharp blades.
l
Some foods, e.g. carrot, may
l
discolour the plastic. Rubbing with
a cloth dipped in vegetable oil may
help to remove discolouration.
Do not use abrasives.
l
hand blender shaft
either
Part fill the beaker or a similar
l
container with warm soapy water.
Plug into the power supply, then
insert the hand blender shaft and
switch on.
Unplug, then dry
l
or
Wash the blades under running
l
water, then dry thoroughly.
on
bm
6
Never immerse in water or
l
allow liquid inside the shaft.
If water does get inside, drain
and allow to dry before use.
Do not dishwash.
l
service and customer
care
If you experience any
l
problems with the operation
of the hand blender or
attachments, before calling
for assistance refer to the
troubleshooting guide or visit
www.kenwoodworld.com.
UK
If you need help with:
using your appliance
l
servicing or repairs
l
call Kenwood Customer Care on
Z
0345 222 0458. Have your
model number (e.g. HDP10)
and date code (5 digit code
e.g. 20T04) ready. They are on
the underside of the power handle.
spares and attachments
l
Z call 0844 557 3653.
other countries
If you experience any problems with
l
the operation of your appliance,
before requesting assistance refer
to the "troubleshooting guide"
section in the manual or visit
www.kenwoodworld.com.
Please note that your product
l
is covered by a warranty, which
complies with all legal provisions
concerning any existing warranty
and consumer rights in the country
where the product was purchased.
If your Kenwood product
l
malfunctions or you find any
defects, please send it or bring
it to an authorised KENWOOD
Service Centre. To find up to date
details of your nearest authorised
KENWOOD Service centre visit
www.kenwoodworld.com or the
website specific to your Country.
Designed and engineered by
l
Kenwood in the UK.
Made in China.
l

Advertisement

loading
Need help?

Need help?

Do you have a question about the triblade HDP109WG and is the answer not in the manual?

This manual is also suitable for:

Triblade hdp10Triblade hdp100wgTriblade hdp101wg