Configure The Sip Parameters - CyberData 011030 Operation Manual

22 Installing the VoIP Indoor Intercom
Configure the Intercom Parameters

2.3.4 Configure the SIP Parameters

Note
Web Page Item
SIP Server*
Outbound Proxy
Remote SIP Port*
Local SIP Port*
SIP User ID*
CyberData Corporation
1. Click SIP Setup to open the SIP Setup page
For specific server configurations, go to the following URL:
http://www.cyberdata.net/support/voip/intercom.html
2. On the SIP Setup page, enter values for the parameters indicated in
(Figure 2-16).
Figure 2-16. SIP Setup Page
Table 2-7. SIP Setup Parameters
Description
Enter the SIP server represented as either a numeric IP
address in dotted decimal notation or the fully qualified
host name (FQHN) up to 64 characters.
Enter the Outbound Proxy as either a numeric IP address
in dotted decimal notation or the fully qualified host name
(FQHN) up to 64 characters.
Enter the Remote SIP Port number (default 5060).
Enter the Local SIP Port number (default 5060).
Enter the SIP User ID (up to 25 alphanumeric characters).
930260A
Table 2-7.
Operations Guide