Configure The Sip Parameters - CyberData 011214 Operation Manual

2.6.8 Configure the SIP Parameters

1. Click on the SIP menu button to open the SIP page
Operations Guide
Figure 2-25. SIP Configuration Page
930809U
Installing the SIP Outdoor Intercom with Keypad
Configure the SIP Parameters
(Figure 2-25).
The strobe settings will only
appear if a CyberData Strobe
product is connected to your
device.
If a CyberData Strobe product
is not connected to your
device, you will not see the
strobe settings.
CyberData Corporation
48