Installing A Memory Module - VIA Technologies EPIA-P910 User Manual

4.2.1. Installing a Memory Module

Step 1 Step 1
Step 1 Step 1
Align the notch on the SODIMM memory module with the protruding wedge
on the SODIMM memory slot. Insert the SODIMM memory module at a 30
degree angle relative to the SODIMM memory slot.
Figure Figure Figure 23 Figure 23 23 23: Inserting the memory module : Inserting the memory module : Inserting the memory module : Inserting the memory module
Step 2 Step 2 Step 2 Step 2
Insert the SODIMM memory module between the two rows of pins. Then push
down until the locking clips lock the SODIMM memory module into place.
There will be a slight tension as the SODIMM memory module is being locked.
Figure Figure 24 24: Locking the memory module : Locking the memory module
Figure Figure 24 24 : Locking the memory module : Locking the memory module
EPIA- - - - P910 EPIA P910 User Manual User Manual
EPIA EPIA P910 P910 User Manual User Manual
36