Regulatory Compliance - VIA Technologies EPIA-P910 User Manual

Pico-itx embedded board

Table of Contents

No part of this document may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language,

in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise without the prior written

permission of VIA Technologies, Incorporated.

Trademarks

All trademarks are the property of their respective holders.

Disclaimer

No license is granted, implied or otherwise, under any patent or patent rights of VIA Technologies. VIA Technologies makes no

warranties, implied or otherwise, in regard to this document and to the products described in this document. The information

provided in this document is believed to be accurate and reliable as of the publication date of this document. However, VIA

Technologies assumes no responsibility for the use or misuse of the information (including use or connection of extra

device/equipment/add-on card) in this document and for any patent infringements that may arise from the use of this document.

The information and product specifications within this document are subject to change at any time, without notice and without

obligation to notify any person of such change.

VIA Technologies, Inc. reserves the right the make changes to the products described in this manual at any time without prior

notice.

Regulatory Compliance

FCC- - - - A Radio Frequency Interference Statement

FCC

A Radio Frequency Interference Statement

This equipment has been tested and found to comply with the limits for a class A digital device, pursuant to part 15 of the FCC

rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a

commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in

accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a

residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his

personal expense.

Notice 1

The changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to

operate the equipment.

Notice 2

Shielded interface cables and A.C. power cord, if any, must be used in order to comply with the emission limits.

Notice 3

The product described in this document is designed for general use, VIA Technologies assumes no responsibility for the conflicts

or damages arising from incompatibility of the product. Check compatibility issue with your local sales representatives before

placing an order.

Tested To Comply

With FCC Standards

FOR HOME OR OFFICE USE

Table of Contents