Onboard Connectors; Lvds Connector - VIA Technologies EPIA-P910 User Manual

2.2. Onboard Connectors

2.2.1. LVDS Connector

The mainboard has one 24-pin LVDS panel connector on the bottom side. The
onboard LVDS panel connector allows to connect the panel's LVDS cable to
support the single-channel 18-bit/24-bit display. Backlight controls are
integrated into the LVDS panel connector pinout. The LVDS panel connector
is labeled as "LVDS1". The pinout of the connector is shown below.
Figure 9 9 9 9 : LVDS connector Figure : LVDS connector
Figure Figure : LVDS connector : LVDS connector
Pin Pin Pin Pin Si Si Si Signal gnal gnal gnal Pin Pin Pin Pin
1 LVDSD0- 2
3 LVDSD0+ 4
5 GND 6
7 PVDD2 8
9 PVDD2 10
11 LCD1_DATA 12
EPIA- - - - P910 EPIA P910 User Manual
EPIA EPIA P910 P910
Signal Signal Signal Signal
LVDSD1-
LVDSD1+
GND
LVDSD2-
LVDSD2+
GND
User Manual
User Manual User Manual
16