Select Ring (And Ringer Volume) - Lucent Technologies Voice Terminal 8411 User Manual

To change a regular call into a
priority call (when you hear a
call waiting ringback tone)

Select Ring (and Ringer Volume)

To select a personalized ring
1
If you are using an 8411 with a display, press
press the softkey below PCall
If your 8411 does not have a display or if PCall is not
available on your display, press
2
Wait for called party to answer
Note: If you still receive a call waiting ringback tone, wait a
few minutes and try again.
1
Press Shift
Red light goes on steadily
2
Press Hold
Red light next to
Current ringing pattern plays and repeats every four
seconds
If your 8411 has a display, it shows the ringing pattern
you are hearing, such as:
SELECT RING PATTERN: 1
3
Continue to press (and then release)
a display set, you can also press
or ) to cycle through all eight ringing patterns
Prev
Priority
Shift
winks
Hold
(or, if you are using
Next
Menu
and then
35