Speaker - Lucent Technologies Voice Terminal 8411 User Manual

Speaker

Note: Your voice terminal is set for either the Speaker (listen-only) or the Speakerphone (listen
and talk) function. Check with your system manager to see which of these two features you can
use.
Use the following procedures if your voice terminal is set for the Speaker
(listen-only) feature.
To place a call without lifting
the handset, or to use speaker
with any listening-only
feature activity (such as,
monitoring a call on which
you have been put on hold or
for group listening)
Note: In order for the other
party to hear you, you must
speak through the handset.
To turn off the speaker and
return to handset
1
Press Speaker
Red light next to
red light next to
2
Place call or access selected feature
3
Adjust speaker volume if necessary
To raise the volume, press the right half of the Speaker
Volume control button labeled
to lower the volume, press the left half of the Speaker
Volume control button labeled
If you have a display, it shows:
SPEAKER
(There are eight possible volume settings. On the display,
one arrow is the lowest setting, and eight arrows is the
highest setting.)
1
Pick up handset
Red light next to
to Mute go off
Speaker goes off
Speaker
goes on;
Mute goes on
;
L>>>>> H
Speaker and red light next
38