Call Pickup; Conference - Lucent Technologies Voice Terminal 8411 User Manual

Call Pickup

You can access this feature with the softkeys only if your voice terminal has a display and if the
feature's abbreviation, CPkUp, appears on the second line of one of the feature option screens.
To answer a call placed to a
member of your pickup group
when your voice terminal is
idle

Conference

To add another party to a call
(for a total of up to six parties)
1
If you are using an 8411 with a display, press
press the softkey below CPkUp
If your 8411 does not have a display or if CPkUp is not
available on your display, press
or Dial Call Pickup access code __________
Called voice terminal stops ringing
You are connected to ringing call
1
Press Conf
Present call is put on hold, and you are given a new call
appearance; all other parties remain connected to each
other
2
Dial number of new party and wait for answer
Note: You can privately discuss the call with the new party
at this time; if no answer or busy, press fluttering
return to held call.
3
Conf
Press again
All parties now connected
Repeat Steps 1 through 3 for additional conference
connections
Menu and then
CallPickup
[dial tone]
xxxxx
to
28