Intercom (Automatic/Dial) - Lucent Technologies Voice Terminal 8411 User Manual

You can access this feature with the softkeys only if your voice terminal has a display and if the
feature's abbreviation, IAuto (for Automatic Intercom feature), or IDial (for the Dial Intercom
feature) appears on the second line of one of the feature option screens.
To make a call to your
predetermined Automatic
Intercom partner
To dial a call to a member of
your Dial Intercom group
To answer any
intercom call
1
If you are using an 8411 with a display, press
press the softkey below IAuto
(while off-hook)
If your 8411 does not have a display or if IAuto is not
available on your display, press
hook)
Special intercom ring is sent
Note: If call is unanswered, press
ringing if you want to redirect it to coverage.
1
If you are using an 8411 with a display, press
press the softkey below IDial
(while off-hook)
If your 8411 does not have a display or if IDial is not
available on your display, press
(while off-hook)
Green light goes on steadily
2
Dial group member's 1- or 2-digit code
Special intercom ring is sent
Note: If call is unanswered, press
ringing if you want to redirect it to coverage.
1
Pick up handset
You are connected to call
Note: If you are active on another call, first
Hold
press , then press flashing
to the held call, press the
Menu
IcomAuto xxx
(while off-
[ringback tone]
Go to Cvr while call is
Menu
IcomDial xxx
[ringback tone]
Go to Cvr
while call is
xxxxx
. To return
xxxxx of the held call.
and then
and then
[dial tone]
31