Automatic Callback - Lucent Technologies Voice Terminal 8411 User Manual

To place a call using an AD
list button or code

Automatic Callback

You can access this feature with the softkeys only if your voice terminal has a display and if the
feature's abbreviation, AutCB, appears on the second line of one of the feature option screens.
To automatically place
another call to an extension
that was busy, did not answer,
or returned call waiting
ringback tone
1
Pers List
Press or
or Dial appropriate AD List code:
List 1 __________
List 2 __________
List 3 __________
Note: An Enhcd List
see your system manager.
2
Dial desired list item (1, 2, 3...)
Call is automatically dialed
1
If you are using an 8411 with a display, press
press the softkey below AutCB during call attempt
If your 8411 does not have a display or if AutCB is not
available on your display, press
attempt
Note: If you send your calls to coverage after activating
Automatic Callback, you callback calls will still ring at your
extension and will not be redirected to coverage.
2
Hang up
You will get a 3-burst priority ring when both you and the
called extension are idle; when you answer, regular
ringing is sent to the called party
3
Lift handset when you hear priority ring
Note: Automatic Callback is automatically canceled after 30
minutes.
Grp List Sys List
or
may also be available;
AutoCallBk
[confirmation tone]
[dial tone]
[ringback tone]
Menu
and then
during call
23