Mute; Priority Calling - Lucent Technologies Voice Terminal 8411 User Manual

Mute

Note: When you are talking on the handset, the Mute feature affects the microphone associated
with the handset rather than the speakerphone.
This feature has no effect on an external speakerphone attached to your voice terminal.
To prevent the other
party from hearing you (To
mute the handset
or speakerphone microphone)

Priority Calling

You can access this feature with the softkeys only if your voice terminal has a display and if the
feature's abbreviation, PCall, appears on the second line of one of the feature option screens.
To place a priority call
(3-burst ring)
1
Mute
Press
Red light next to
cannot hear you
2
When you are ready to resume conversation with the other
party, press
Mute
Red light next to
hear you again
Note: When the voice terminal is set for the Speaker (listen-
only) feature, the light next to
using the speaker.
The Mute feature turns off automatically when you hang up, or
switch from the speakerphone to the handset or from the handset
to the speakerphone.
1
If you are using an 8411 with a display, press
press the softkey below PCall
(while on-hook or off-hook)
If your 8411 does not have a display or if PCall is not
available on your display, press
(while on-hook or off-hook)
or Dial Priority Calling access code __________
(while on-hook or off-hook)
2
Dial the extension
Wait for called party to answer
Note: If your call is not answered and you wish to redirect it
to coverage, press
Mute goes on and the other party
again
Mute goes off and the other party can
Mute goes on whenever you are
Priority
Go to Cvr while call is ringing.
Menu and then
[dial tone]
[ringback tone]
34