Test/Diagnostics; Transfer - Lucent Technologies Voice Terminal 8411 User Manual

Test/Diagnostics

To test the lights and the
display on your voice terminal
To perform a diagnostics test
of the PassageWay connection
and the status of the Analog
Adjunct (if either of these is
connected to your 8411 set)

Transfer

1
While on-hook or off-hook, press and hold
Red light next to
Note: If the red light next to
goes on steadily, it means that the voice terminal is not
communicating with the PBX. In such a case, see your
system manager.
The lights go on steadily in two groups, and, if your 8411
has a display, all the display segments fill in
2
To end test, release
Lights return to pretest state; red light next
to Test goes off
Note: If the display or the lights do not respond during the
test, notify your system manager.
1
Press Shift
2
Test
Press
The red and green lights go on next to Buttons #9 and/or
#10 to indicate the status of these two functions. For more
information on the meaning of the PassageWay and
Analog Adjunct lights, see "PassageWay and Analog
Adjunct Status Indications."
Note: If you press any voice terminal buttons or if you receive
or place a call during the diagnostics test, the test is terminated
and the voice terminal returns to Normal Mode.
Test
goes on
Test flashes rather than
Test
Test
41