Call Coverage/Consult - Lucent Technologies Voice Terminal 8411 User Manual

Call Coverage/Consult

You can access the Consult feature with the softkeys only if your voice terminal has a display and
if the feature's abbreviation, Cnslt, appears on the second line of one of the feature option screens.
To answer a call for a
coworker for whom you are a
coverage point
To leave a message for a
coworker to call the original
caller's extension
To use the Consult feature to
talk privately with a coworker
after answering a redirected
call
1
Press xxxxx of incoming call when ring begins or green light
flashes
Note: The call is not at your terminal until the green light is
flashing.
1
Cvr CallBk
Press
Note: To leave a message for a coworker to call you,
activate Leave Word Calling instead.
1
Press Transfer
Call is put on hold
2
If you are using an 8411 with a display, press
press the softkey below Cnslt
If your 8411 does not have a display or if Cnslt is not
available on your display, press
or Dial coworker's extension
Note: You can privately discuss call; if coworker is not
available, press the fluttering
3
Press Transfer again to send call to coworker
or Press Conf to make it a 3-party call
while connected to the call
[confirmation tone]
Consult
[priority ring to coworker]
xxxxx to reconnect to call.
[dial tone]
Menu
and then
25