Reset Speakerphone; Select Ring (And Ringer Volume) - Lucent Technologies Voice Terminal 8410 Quick Reference

.

RESET SPEAKERPHONE

NOTE: You can use this feature only if the Reset
Spkr label appears under the
To adjust the speakerphone to the surrounding
room acoustics
1 While on-hook, press
Speaker
You hear a series of tones.

SELECT RING (and RINGER VOLUME)

To select a personalized ring
1 If your 8410 has a
then press
if your 8410 has a
Current ringing pattern plays.
2 To cycle through all eight ring patterns:
if your 8410 has a
press (and then release)
subsequent pattern;
if your 8410 has a
press (and then release)
pattern.
NOTE: If your 8410 has a display, you can also press
or
Next
patterns.
3 To set your selected ringing pattern:
if your 8410 has a
you hear the desired ringing pattern;
if your 8410 has a
anymore. You will hear the selected ringing
Ring
pattern two more times, and then it will be
automatically saved.
You hear confirmation tone.
To adjust ringer volume if necessary (speaker is
not active)
1 To raise the volume, press the right half of the
Volume control button labeled
volume, press the left half of the Volume control
button labeled
.
Shift
;
Hold
Ring
Shift
Ring
to cycle through the eight ringing
Prev
Shift
Ring
Speaker
and then press
Shift
button, press
button, press
button, continue to
Hold
button, continue to
Ring
button, press
button, do not press
.
7
button.
Shift
Ring
to hear each
to hear each new
Shift
; to lower the
and
.
when