Exit (Normal); Inspect - Lucent Technologies Voice Terminal 8411 User Manual

Exit (Normal)

To exit any display feature
and return to Normal (call-
handling) Mode display

Inspect

You can access this feature with the softkeys only if your voice terminal has a display and if the
feature's abbreviation, Inspt, appears on the second line of one
of the feature option screens.
Note: If you are currently on a call and a new call comes in, the display automatically shows you
information on the new call. You do not need to use the Inspect feature in this situation. However,
you can use the Inspect feature to see who's on a call that has been placed on hold.
To see who's on hold
while on a call
1
Press Exit
Display will show call information for active
call appearance
1
Press Menu and then press the softkey below Inspt
or, if Inspt is not available on your display,
press
Inspect
2
xxxxx
Press of held call
Information is shown on display screen;
you remain connected to present call
3
To return to held call, press
held call
Exit and xxxxx of
45