Message - Lucent Technologies Voice Terminal 8411 User Manual

To leave a message without
ringing an extension
To cancel a Leave Word
Calling message
Note: You cannot cancel a
message left for an AUDIX
subscriber.

Message

To retrieve a message when
your Message light is on
1
If you are using an 8411 with a display, press
press the softkey below LWC
(while on-hook or off-hook)
If your 8411 does not have a display or if LWC is not
available on your display, press
(while on-hook or off-hook)
or Dial Leave Word Calling access code __________
(while on-hook or off-hook)
2
Dial extension
Message light goes on at called voice terminal
(if so equipped)
3
Hang up or press
1
If you are using an 8411 with a display, press
press the softkey below CnLWC
(while on-hook or off-hook)
If your 8411 does not have a display or if CnLWC is not
available on your display, press
or off-hook)
or Dial Leave Word Calling cancel code __________ (while
on-hook or off-hook)
2
Dial extension
Note: If reorder tone is heard, message is not canceled; try
again.
1
If your set has a display, see the Message Retrieval procedures
under the Display Features Procedures heading. Otherwise,
see your system manager for instructions regarding your local
message retrieval procedures
LWC
[confirmation tone]
Drop
Cancel LWC
[confirmation tone]
Menu
and then
[dial tone]
Menu and then
(while on-hook
[dial tone]
33