Stored Number - Lucent Technologies Voice Terminal 8411 User Manual

To exit any display feature
and return to normal display

Stored Number

You can access this feature with the softkeys only if your voice terminal has a display and if the
feature's abbreviation, View, appears on the second line of one of the feature option screens.
To view a number stored on
an AD button
To see the number stored as a
list item
1
Exit
Press
Display will show call information for active call
appearance
1
Press Menu and then press the softkey below View
or, if View is not available on your display,
Stored
press
2
Press selected
AD xxxxx
Stored number shown
3
To return to Normal (call-handling) Mode display, press
or repeat Step 2 to see another stored number
1
Press Menu and then press the softkey below View
or, Press Stored
2
Press selected Pers List
or Dial appropriate AD List code:
List 1 __________
List 2 __________
List 3 __________
Note: An Enhcd List
see your system manager.
3
Dial selected list item (1, 2, 3...)
Stored number shown
4
Hang up
5
To return to Normal (call-handling) Mode display, press
or being again at Step 2 to see another
stored number
Grp List or Sys List
or
may also be available;
Exit
Exit
47