Automatic Callback; Bridging/Manual Exclusion; Call Coverage/Consult; Call Forwarding All Calls - Lucent Technologies Voice Terminal 8434DX Quick Reference

NOTE: An Enhanced List may also be available.
ACK
2 Dial desired list item (1, 2, 3...).

AUTOMATIC CALLBACK

To automatically place another call to an extension
that was busy or did not answer
1 During call attempt, press softkey below AutCB
(if shown on the display)
or Press
Hang up.
You hear a 3-burst priority ring when both you
and the called extension are idle.
2 Pick up handset to be connected to call.
To cancel Automatic Callback
1 While on-hook, press softkey below AutCB again
(if shown on the display)
or Press

BRIDGING/MANUAL EXCLUSION

To answer a bridged call
1 Press call appearance button of bridged call and lift
handset or press
NOTE: If your terminal has Ringing Appearance
Preference, just lift the handset or press
To prevent other bridged terminals from entering a
call (on a per call basis)
1 Press the softkey below Excl while active on a call
or Press
NOTE: Pressing the softkey below Excl or
pressing

CALL COVERAGE/CONSULT

To answer a call for a coworker for whom you are a

CALL FORWARDING ALL CALLS

coverage point
1 Press the call appearance of incoming call when
ring begins or green light flashes.
AutoCallBk
AutoCallBk
Speaker
Excl xxxxx
Excl xxxxx
.
again.
.
while connected to the call.
again reactivates bridging.
3
.
Speaker