Adjustment/Maintenance - Utax CDC 5626 User Manual

Setup, Registration, and User Management > System Menu
Item
Sleep Timer
Error Clear Timer

Adjustment/Maintenance

Adjust printing quality and conduct machine maintenance.
Item
Density Adjustment
Copy
Send/Box
Background Density Adj.
Copy (Auto)
Send/Box (Auto)
Toner Save Level (EcoPrint)
Copy
Printer
Auto Color Correction
Correcting Black Line
Display Brightness
Set amount of time before entering Sleep.
Value: 1 to 240 minutes (1 minute increments)
NOTE: If you select [Off] for [Auto Sleep], the time display does not appear.
If you select [On] for Auto Error Clear, set the amount of time to wait before automatically
clearing errors.
Value: 5 to 495 seconds (every five seconds)
NOTE: If you select [Off] for [Auto Error Clear], the time display does not appear.
Adjust density.
Adjust copy density. Adjustment can be made in 7 levels.
Value: -3 (Lighter), -2, -1, 0 (Normal), +1, +2, +3 (Darker)
Adjust scan density when sending or storing the data in Document Box. Adjustment can be
made in 7 levels.
Value: -3 (Lighter), -2, -1, 0 (Normal), +1, +2, +3 (Darker)
Darkens or lightens overall background density adjustment.
Darkens or lightens overall background density adjustment during copying. Adjustment can be
made in 7 levels.
Value: -3 (Lighter), -2, -1, 0 (Normal), +1, +2, +3 (Darker)
Darkens or lightens overall background density when sending images or storing them in the
Document Box. Adjustment can be made in 7 levels.
Value: -3 (Lighter), -2, -1, 0 (Normal), +1, +2, +3 (Darker)
Set the toner-saving level when using EcoPrint.
Lowers or raises the toner-saving level during copying. Adjustment can be made in 5 levels.*
Value: 1 to 5
Lowers or raises the toner-saving level during printing. Adjustment can be made in 5 levels.
Value: 1 to 5
This setting allows you to adjust the detection level used by the machine to determine whether
the original is color or black and white during Auto Color Mode. Setting a lower value will result
in more originals being identified as color, while a larger value will tend to increase the number
of originals being identified as black and white.
Value: 5 (B & W), 4, 3, 2, 1 (Color)
Correct fine lines (streaks caused by contamination), which may appear on the image, when
the document processor is used.
Value
Off: No correction performed.
On (Low): Correction performed. The reproduction of fine lines on the original may become
lighter than when using [Off].
On (High): Select this item if a streak remains after using [On (Low)]. The reproduction of fine
lines on the original may become lighter than when using On (Low).
Set the brightness of the touch panel.
Value: 1 (Darker), 2, 3, 4 (Lighter)
9-24
Description
Description