Adjustment/Maintenance; Copy Density Adjustment - Utax CDC 1730 Instruction Handbook Manual

Adjustment/Maintenance

Adjust printing quality and conduct machine maintenance.
•

Copy Density Adjustment ...8-44

• Send/Box Density Adjust ...8-45
• Drum Refresh ...8-45
• Correcting Fine Black Lines ...8-46
• System Initialization ...8-46
• Display Brightness ...8-46
• Silent Mode ...8-47
• Auto Color Correction...8-47
• Color Registration...8-47
• Color Calibration Cycle...8-50
• Gray Adjustment...8-51
• Color Calibration...8-52
• Developer Refresh...8-53
• Laser Scanner Cleaning...8-53
• MP Tray Cleaning...8-53
• First Print Position...8-54
NOTE:
If user login administration is enabled, you can only change the settings by logging in with
administrator privileges.
Copy Density Adjustment
Adjust copy density. Adjustment can be made in 7 levels both in auto and manual density modes.
Use the procedure below to adjust the copy density.
1
Press the System Menu key.
2
Press [ ], [Adjustment/Maintenance] and then [Next] of Copy Density Adjustment.
3
Press [Change] of Auto or of Manual.
4
Press [-3] - [+3] (Lighter-Darker) to adjust density.
5
Press [OK].
8-44
Default Setting (System Menu)