Back Panel With Ports, Buttons, And Connector - NETGEAR D6400 User Manual

Back Panel with Ports, Buttons, and Connector

The back panel of the modem router provides ports, buttons, and a DC power connector. The
following figure shows only part of the back panel.
USB
2.0 port
Figure 3. Modem router back panel
Viewed from left to right, the back panel contains the following components:
• USB port. One USB 2.0 port. (Another USB 2.0 port is located on the right side panel.)
• DSL port. One RJ-11 asynchronous DSL port for connecting the modem router to an
ADSL or VDSL line. This port is colored gray.
• Ethernet LAN ports. Four Gigabit Ethernet RJ-45 LAN ports to connect the modem
router to LAN devices. These ports are colored yellow.
• Internet port. One Gigabit Ethernet RJ-45 port to connect the modem router to a fiber or
cable modem. This port is colored red.
Note: You can use either the DSL port or the Internet port for WAN connectivity.
You cannot use both simultaneously.
• Reset button. For information about using the Reset button, see
on page 227.
• Power On/Off button. Press the Power On/Off button to provide power to the modem
router or to turn it off.
• DC power connector. Connect the power adapter that came in the product package to
the DC power connector.
AC1600 WiFi VDSL/ADSL Modem Router Model D6400
Ethernet
LAN ports
DSL port
Hardware Overview of the Modem Router
Reset
button
Internet
port On/Off button
13
DC power
connector
Power
Use the Reset Button