NETGEAR D6400 User Manual page 200

AC1600 WiFi VDSL/ADSL Modem Router Model D6400
The previous figure shows only the top of the Internet Setup screen.
6. Configure a VLAN for interface WAN1:
a. Make sure that WAN1 is selected from the menu and that the Enable This Interface
check box is selected for interface WAN1 (it is by default).
b. Select the Use VLANID check box.
c. Enter a VLAN ID that applies to interface WAN1.
The VLAN ID can be in a range from 0 to 4094. The default VLAN ID is 0.
d. To specify a priority for the VLAN, in the Priority (802.1p) field, enter a value from 0
to 7.
e. Click the Apply button.
Your settings are saved for interface WAN1.
7. Configure a VLAN for interface WAN2:
a. From the menu below DSL mode, select WAN2.
b. Make sure that the Enable This Interface check box is selected for interface WAN2.
If you already enabled interface WAN2 (see
page 197), the check box is selected.
c. Select the Use VLANID check box.
d. Enter a VLAN ID that applies to interface WAN2.
The VLAN ID can be in a range from 0 to 4094. The default VLAN ID is 0.
e. To specify a priority for the VLAN, in the Priority (802.1p) field, enter a value from 0
to 7.
f. Click the Apply button.
Your settings are saved for interface WAN2.
Manage the WAN and LAN Network Settings
200
Enable the WAN2 Interface for IPTV on