Set Up An Ipv6 Connection Through Auto Detect - NETGEAR D6400 User Manual

modem router blocks this packet. This function works in two modes: In secured mode, the
modem router inspects both TCP and UDP packets. In open mode, the modem router
inspects UDP packets only.
IPv6 addresses are denoted by eight groups of hexadecimal quartets that are separated by
colons. You can reduce any four-digit group of zeros within an IPv6 address to a single zero
or omit it. The following errors invalidate an IPv6 address:
• More than eight groups of hexadecimal quartets
• More than four hexadecimal characters in a quartet
• More than two colons in a row

Set Up an IPv6 Connection Through Auto Detect

If you are not sure what type of IPv6 connection the modem router uses, use the Auto Detect
connection type, which lets the modem router detect the IPv6 type that is in use.

To set up an IPv6 Internet connection through auto detection:
1. Launch an Internet browser from a computer or WiFi device that is connected to the
network.
2. Type http://www.routerlogin.net.
A login screen displays.
3. Enter the modem router user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
4. Click the OK button.
The BASIC Home screen displays.
5. Select ADVANCED > Advanced Setup > IPv6.
The IPv6 screen displays.
6. From the Internet Connection Type menu, select Auto Detect.
AC1600 WiFi VDSL/ADSL Modem Router Model D6400
Manage the Internet Settings Manually
74