Set Up A Bridge For A Vlan Tag Group - NETGEAR D6400 User Manual

AC1600 WiFi VDSL/ADSL Modem Router Model D6400
8. Select a Wired Ports check box or a Wireless check box:
• If your device is connected to an Ethernet port on the modem router, select the Wired
Ports check box that corresponds to the Ethernet port on the modem router to which
the device is connected.
• If your device is connected to your modem router's WiFi network, select the Wireless
check box that corresponds to the router's WiFi network to which the device is
connected.
Note: You must select at least one Wired Ports or Wireless check box. You
can select more than one check box.
9. Click the Apply button.
Your settings are saved.

Set Up a Bridge for a VLAN Tag Group

If the devices that are connected to the modem router's Ethernet LAN port or WiFi network
include an IPTV device, your ISP might require you to set up a bridge for a VLAN tag group.
A bridge with a VLAN tag group prevents packets that are sent between the IPTV device and
the modem router's Internet port from being processed through the modem router's network
address translation (NAT) service.
You can add VLAN tag groups to a bridge and assign VLAN IDs and priority values to each
VLAN tag group.
Manage the WAN and LAN Network Settings
202