NETGEAR D6400 User Manual page 126

b. Enter the MAC address and device name for the device that you want to allow.
c. Click the Add button on the Add Allowed Device screen.
The device is added to the allowed list on the Access Control screen.
8. To remove a device from the allowed list, do the following:
a. Select the check box for the device.
b. Click the Remove from the list button.
The device is removed from the allowed list.
9. Click the Apply button.
Your settings are saved.
Add Devices to or Remove Them from the Blocked List
If you set up an access list that allows all new devices to access your network but you want to
block some devices from accessing your network, you must specify the devices that you want
to block.

To add or remove devices that are blocked:
1. Launch an Internet browser from a computer or WiFi device that is connected to the
network.
2. Type http://www.routerlogin.net.
A login screen displays.
3. Enter the user name and password for the modem router.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
4. Click the OK button.
The BASIC Home screen displays.
5. Select ADVANCED > Security > Access Control.
The Access Control screen displays.
6. Click the View list of blocked devices not currently connected to the network link.
AC1600 WiFi VDSL/ADSL Modem Router Model D6400
Control Access to the Internet
126