NETGEAR D6400 User Manual page 210

AC1600 WiFi VDSL/ADSL Modem Router Model D6400
A login screen displays.
3. Enter the user name and password for the modem router.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
4. Click the OK button.
The BASIC Home screen displays.
5. Select ADVANCED > Setup > LAN Setup.
6. In the RIP direction menu, select one of the following options:
• Both. The modem router broadcasts its routing table periodically and incorporates
information that it receives. This is the default setting.
• Out Only. The modem router broadcasts its routing table periodically but does not
incorporate the RIP information that it receives.
• In Only. The modem router incorporates the RIP information that it receives but does
not broadcast its routing table.
7. In the RIP Version menu, select one of the following options:
• Disabled. The RIP version is disabled. This is the default setting.
• RIP-1. This format is universally supported. It is adequate for most networks, unless
you are using an unusual network setup.
• RIP-2B or RIP-2M. This format carries more information. Both RIP-2B and RIP-2M
send the routing data in RIP-2 format. RIP-2B uses subnet broadcasting. RIP-2M
uses multicasting.
8. Click the Apply button.
Your settings are saved.
Manage the WAN and LAN Network Settings
210