Back Panel Model Ms324Txup - NETGEAR MS324TXUP Hardware Installation Manual

24-port multigig ethernet ultra60 poe++ smart switch with 4 sfp+ ports and optional remote/cloud management

Hide thumbs

Table Of Contents

Table of Contents

24-Port Multigig Ethernet Ultra60 PoE++ Smart Switch with 4 SFP Ports Hardware Installation

Table 2. LEDs on the front panel of model MS324TXUP

LED

Description

Power LED

Blinking green: The switch is booting.

Solid green: The switch is powered on and operating normally. If you changed the

management mode of the switch to NETGEAR Insight, the switch is not yet added to an

Insight managed network or not yet connected to the Insight cloud management server.

Solid blue: The management mode of the switch is NETGEAR Insight, the switch is added

to an Insight managed network, and the switch is connected to the Insight cloud

management server. You can manage and monitor the switch using the NETGEAR Insight

app or Insight Cloud portal.

Off: Power is not supplied to the switch.

Fan LED

Solid green: The fans are operating normally.

Solid yellow: A problem occurred with the fans.

PoE Max LED

Off: More than 7W of PoE power is available.

Solid yellow: A PoE fault occurred. For more information, see PoE troubleshooting

suggestions on page 34.

Blinking yellow: The PoE Max LED was active in the previous two minutes.

Ports 1–24, left LEDs

Off: No link is established.

Link, speed, and

Solid green: A valid link at a speed of 2.5 Gbps is established.

activity

Blinking green: The port is transmitting or receiving packets at 2.5 Gbps.

Solid yellow: A valid link at a speed of 100 Mbps or 1000 Mbps is established.

Blinking yellow: The port is transmitting or receiving packets at 100 Mbps or 1000 Mbps.

Ports 1–24, right LEDs

Off: The port is not delivering PoE.

PoE status

Solid green: The port is delivering PoE.

Solid yellow: A PoE fault occurred. For more information, see PoE troubleshooting

suggestions on page 34.

SFP+, LEDs

Off: No module is installed in the SFP+ port or no link is established on the SFP+ port.

Link, speed, and

Solid green: The module in the SFP+ port established a valid link at a speed of 10 Gbps.

activity

Blinking green: The module in the SFP+ is transmitting or receiving packets at 10 Gbps.

Solid yellow: The module in the SFP+ port established a valid link at a speed of 1 Gbps.

Blinking yellow: The module in the SFP+ is transmitting or receiving packets at 1 Gbps.