Specify A Cable Or Fiber Connection With A Login Requirement; And Pppoe Service - NETGEAR D6400 User Manual

Specify a Cable or Fiber Connection With a Login Requirement

and PPPoE Service

If you want to manually configure the cable or fiber connection settings, use the information
that your ISP gave you to log in and connect to your Internet service. If you cannot find this
information, contact your ISP. Entering incorrect information might prevent the modem router
from connecting to the Internet.

To view or specify the settings for a cable or fiber Internet connection that requires a
login and uses a PPPoE service:
1. Launch an Internet browser from a computer or WiFi device that is connected to the
network.
2. Type http://www.routerlogin.net.
A login screen displays.
3. Enter the modem router user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
4. Click the OK button.
The BASIC Home screen displays.
5. Select Internet.
The Internet Setup screen displays.
6. Scroll down to the Does your Internet connection require a login? section and select the No
radio button.
As an example, the following figure already shows the settings that display when you
configure a cable or fiber connection.
AC1600 WiFi VDSL/ADSL Modem Router Model D6400
Manage the Internet Settings Manually
69