Change An Outbound Firewall Rule - NETGEAR D6400 User Manual

Change an Outbound Firewall Rule

You can change an existing outbound firewall rule.

To change an outbound firewall rule:
1. Launch an Internet browser from a computer or WiFi device that is connected to the
network.
2. Type http://www.routerlogin.net.
A login screen displays.
3. Enter the user name and password for the modem router.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
4. Click the OK button.
The BASIC Home screen displays.
5. Select ADVANCED > Security > Block Services.
The following figure shows two rules in the Service Table.
6. In the Service Table, select the radio button for the rule.
7. Click the Edit button.
The Block Services Setup screen displays.
8. Change the settings.
For more information about the settings, see
Custom Service or Application
9. Click the Accept button.
Your settings are saved. The changed rule displays in the Service Table on the Block
Services screen.
AC1600 WiFi VDSL/ADSL Modem Router Model D6400
on page 133.
Control Access to the Internet
Add an Outbound Firewall Rule for a
136