NETGEAR D6400 User Manual page 198

physical WAN interfaces, see
page 197.
The modem router uses virtual interface WAN1 for regular Internet service. The modem
router can use virtual interface WAN2 for Internet Protocol television (IPTV) service. By
default, interface WAN1 is enabled and interface WAN2 is disabled. In most cases, if you are
not subscribed to IPTV service, you do not need to enable interface WAN2.
If your ISP provides IPTV service in addition to regular Internet service and you are
subscribed to IPTV, you might need to configure and enable interface WAN2. You might also
need to configure one or more VLANs and set up a bridge:
• For information about configuring VLANs, see
page 199.
• For information about setting up a bridge, see
Tag Group on page 201

To enable virtual interface WAN 2:
1. Launch an Internet browser from a computer or WiFi device that is connected to the
network.
2. Type http://www.routerlogin.net.
A login screen displays.
3. Enter the modem router user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
4. Click the OK button.
The BASIC Home screen displays.
5. Select Internet.
AC1600 WiFi VDSL/ADSL Modem Router Model D6400
Change the Physical WAN Connection Preference
Manage the WAN and LAN Network Settings
Enable and Configure a VLAN
Set Up a Bridge for a Port Group or VLAN
198
on
on