Manage The Router Information Protocol Settings - NETGEAR D6400 User Manual

The user name is admin. The default password is password. The user name and
password are case-sensitive.
4. Click the OK button.
The BASIC Home screen displays.
5. Select ADVANCED > Setup > LAN Setup.
6. In the IP Address field, enter the LAN IP address for the modem router.
7. In the IP Subnet Mask field, enter the LAN subnet mask for the modem router.
8. Click the Apply button.
Your settings are saved.
If you changed the LAN IP address of the modem router, you are disconnected when the
changes take effect.
To reconnect, close your browser, relaunch it, and log in to the modem router at its new
LAN IP address.

Manage the Router Information Protocol Settings

Router Information Protocol (RIP) lets the modem router exchange routing information with
other routers. By default, RIP is enabled in both directions (in and out) without a particular
RIP version.

To manage the RIP settings:
1. Launch an Internet browser from a computer or WiFi device that is connected to the
network.
2. Type http://www.routerlogin.net.
AC1600 WiFi VDSL/ADSL Modem Router Model D6400
Manage the WAN and LAN Network Settings
209