NETGEAR D6400 User Manual page 83

AC1600 WiFi VDSL/ADSL Modem Router Model D6400
The modem router automatically detects the information in the following fields:
• Router's IPv6 Address On WAN. This field shows the IPv6 address that is acquired
for the modem router's WAN (or Internet) interface. The number after the slash (/) is
the length of the prefix, which is also indicated by the underline (_) under the IPv6
address. If no address is acquired, the field displays Not Available.
• Router's IPv6 Address On LAN. This field shows the IPv6 address that is acquired
for the modem router's LAN interface. The number after the slash (/) is the length of
the prefix, which is also indicated by the underline (_) under the IPv6 address. If no
address is acquired, the field displays Not Available.
7. In the Login field, enter the login information for the ISP connection.
This is usually the name that you use in your email address. For example, if your main
mail account is JerAB@ISP.com, you would enter JerAB in this field. Some ISPs (such as
Earthlink) require that you use your full email address when you log in. If your ISP
requires your full email address, enter it in this field.
8. In the Password field, enter the password for the ISP connection.
9. In the Service Name field, enter a service name.
If your ISP did not provide a service name, leave this field blank.
Note: The default setting of the Connection Mode menu is Always On to
provide a steady IPv6 connection. The modem router never terminates
the connection. If the connection is terminated, for example, when the
modem is turned off, the modem router attempts to reestablish the
connection immediately after the PPPoE connection becomes
available again.
Manage the Internet Settings Manually
83