NETGEAR D6400 User Manual page 62

AC1600 WiFi VDSL/ADSL Modem Router Model D6400
7. Enter the VDSL settings as described in the following table.
Field
Select Country
Select Internet Service
Provider
Transfer Mode
DSL Mode
Enable This Interface
Multiplexing Method
VPI
VCI
Use VLANID
Priority (802.1p)
Encapsulation
Login
Password
Service Name (If Required)
Description
Select the country in which you use the modem router.
Select the Internet service provider (ISP) that you are using.
If your ISP is not in the menu, select Other.
For a VDSL connection, select PTM.
When you select PTM from the Transfer Mode menu, the only option in the
DSL Mode menu is VDSL.
Make sure that WAN1 is selected from the menu and that the Enable This
Interface check box is selected. These are the default settings.
Note: For information about interface WAN2, see
Interface for IPTV on page 197.
These settings are disabled because they do not apply to a VDSL
connection.
Select the Use VLANID check box and enter the VLAN ID, as indicated by
your ISP.
A VLAN ID might be required if you subscribe to both Internet service and
IPTV service. In some unusual situations, a VLAN ID is required for VDSL
Internet service. If your ISP did not provide you with a VLAN ID, leave the
Use VLANID check box cleared, which is the default setting.
For information about setting up VLAN tag groups, see
a VLAN Tag Group on page 202.
If your ISP provided you with a VLAN ID and a priority value, enter the
priority value, which is a number from 0 to7.
You can enter a priority value only in combination with a VLAN ID. If your
ISP did not provide you with a priority value, leave the default setting (0).
For a PPP over Ethernet (PPPoE) connection, select PPPoE from the
menu.
Note: PPP over ATM (PPPoA) is not supported for a VDSL connection.
Enter the login name that you use to log in to your Internet service, as
indicated by your ISP.
This login name is often an email address.
Enter the password that you use to log in to your Internet service, as
indicated by your ISP.
Enter the service name that you use to log in to your Internet service, as
indicated by your ISP.
Often, a service name is not required.
Manage the Internet Settings Manually
62
Enable the WAN2
Set Up a Bridge for