NETGEAR D6400 User Manual page 24

AC1600 WiFi VDSL/ADSL Modem Router Model D6400
If the NETGEAR genie automatic setup utility displays, skip to
display, do the following:
a. In the address field of the web browser, enter www.routerlogin.net.
b. When prompted, enter admin for the user name and password for the password.
If the NETGEAR genie automatic setup utility displays, skip to
genie automatic setup utility still does not display, see
13. If the browser cannot display the web page, do the following:
• Make sure that the computer is connected to one of the four Ethernet LAN ports or
over WiFi to the modem router.
• Make sure that the Power LED
• Make sure that your browser does not cache the previous page by closing and
reopening the browser.
• Clear the browser cache.
• If the computer is set to a static or fixed IP address (this setting is uncommon), either
change the computer to obtain an IP address automatically from the modem router
through DHCP, or change the IP address of the computer to a static or fixed IP
address in the 192.168.0.2–192.168.0.254 range.
14. Click the Next button.
15. From the Country menu, select the country in which you use the modem router.
16. From the ISP menu, select the ISP that you are using.
If your ISP is not in the menu, select Other.
17. Select the Yes radio button.
18. Click the Next button.
Install and Access the Modem Router and Its Network
Step 13.
of the modem router is lit green.
24
Step 14. If it does not
Step 14. If the NETGEAR