Add/Edit Zone - ZyXEL Communications UAG5100 User Manual

The following table describes the labels in this screen.
Table 175 Configuration > Object > Zone
LABEL
User
Configuration /
System Default
Add
Edit
Remove
Object Reference Select an entry and click Object Reference to open a screen that shows which settings
#
Name
Member
Reference

34.2.1 Add/Edit Zone

The Zone Edit screen allows you to add or edit a zone. To access this screen, go to the Zone
screen (see
Figure 269 Configuration > Object > Zone Add
DESCRIPTION
The UAG comes with pre-configured System Default zones that you cannot delete. You
can create your own User Configuration zones
Click this to create a new, user-configured zone.
Double-click an entry or select it and click Edit to open a screen where you can modify the
entry's settings.
To remove a user-configured trunk, select it and click Remove. The UAG confirms you
want to remove it before doing so.
use the entry. See Section 10.3.2 on page 165
This field is a sequential value, and it is not associated with any entry.
This field displays the name of the zone.
This field displays the names of the interfaces that belong to each zone.
This field displays the number of times an Object Reference is used in a policy.
Section 34.2 on page 396), and click the Add icon or an Edit icon.
UAG Series User's Guide
Chapter 34 Zones
397
for an example.