Figure 98 Configuration > Wireless > AP Management > Edit AP List > Edit VLAN
Each field is described in the following table.
Table 57 Configuration > Wireless > AP Management > Edit AP List > Edit VLAN
LABEL
DESCRIPTION
Enable
Select this option to activate the VLAN. Otherwise, deselect it.
Name
This field is read-only if you are editing an existing VLAN.
Enter the number of the VLAN. You can use a number from 1~4094. For example,
vlan0, vlan8, and so on.
VID
Enter the VLAN ID. This 12-bit number uniquely identifies each VLAN. Allowed values
are 1 - 4094. (0 and 4095 are reserved.)
Member
Use these settings to assign ports to this VLAN as members.
Configuration
Edit
Click this to edit the selected port's membership values.
#
This is sequential indicator of the port number.
Port Name
This indicates the port name.
Member
This indicates whether the selected port is a member or not of the VLAN which is
currently being edited.
Click this field to edit the value.
Tx Tagging
This indicates whether the selected port tags outbound traffic with this VLAN's ID .
Click this field to edit the value.
OK
Click OK to save your changes back to the UAG.
Cancel
Click Cancel to close the window with changes unsaved.
Chapter 9 Wireless
UAG Series User's Guide
142