System; Overview; What You Can Do In This Chapter - ZyXEL Communications UAG5100 User Manual

46.1 Overview

Use the system screens to configure general UAG settings.

46.1.1 What You Can Do in this Chapter

• Use the System > Host Name screen (see
name for the UAG in your network.
• Use the System > USB Storage screen (see
settings for the connected USB devices.
• Use the System > Date/Time screen (see
time for the UAG.
• Use the System > Console Speed screen (see
console port speed when you connect to the UAG via the console port using a terminal emulation
program.
• Use the System > DNS screen (see
Name System) server used for mapping a domain name to its corresponding IP address and vice
versa.
• Use the System > WWW screens (see
or HTTPS access to the UAG and how the login and access user screens look.
• Use the System > SSH screen (see
used to securely access the UAG's command line interface. You can specify which zones allow
SSH access and from which IP address the access can come.
• Use the System > TELNET screen (see
the UAG's command line interface. Specify which zones allow Telnet access and from which IP
address the access can come.
• Use the System > FTP screen (see
can be used to access the UAG. You can also specify from which IP addresses the access can
come. You can upload and download the UAG's firmware and configuration files using FTP. Please
also see Chapter 48 on page 549
• Your UAG can act as an SNMP agent, which allows a manager station to manage and monitor the
UAG through the network. Use the System > SNMP screen (see
configure SNMP settings, including from which zones SNMP can be used to access the UAG. You
can also specify from which IP addresses the access can come.
• Use the Auth. Server screen
RADIUS server.
• Use the Language screen
UAG's Web Configurator screens.
• Use the ZON screen
discovery on the UAG.
C
Section 46.2 on page
Section 46.3 on page
Section 46.4 on page
Section 46.6 on page
Section 46.7 on page
Section 46.8 on page
Section 46.9 on page
Section 46.10 on page
for more information about firmware and configuration files.
(Section 46.12 on page
(Section 46.13 on page
(Section 46.14 on page 531) to enable or disable ZDP discovery and LLDP
UAG Series User's Guide
486
HAPTER
487) to configure a unique
487) to configure the
488) to configure the date and
Section 46.5 on page 492) to configure the
493) to configure the DNS (Domain
501) to configure settings for HTTP
518) to configure SSH (Secure SHell)
523) to configure Telnet to access
524) to specify from which zones FTP
Section 46.11 on page
528) to configure the UAG to operate as a
531) to set the user interface language for the
4 6

System

525) to