ZyXEL Communications UAG5100 User Manual page 398

The following table describes the labels in this screen.
Table 176 Configuration > Object > Zone > Add/Edit
LABEL DESCRIPTION
Name For a system default zone, the name is read only.
For a user-configured zone, type the name used to refer to the zone. You may use 1-31
alphanumeric characters, underscores (
a number. This value is case-sensitive.
Member List Available lists the interfaces that do not belong to any zone. Select the interfaces that you
want to add to the zone you are editing, and click the right arrow button to add them.
Member lists the interfaces that belong to the zone. Select any interfaces that you want to
remove from the zone, and click the left arrow button to remove them.
OK Click OK to save your customized settings and exit this screen.
Cancel Click Cancel to exit this screen without saving.
Chapter 34 Zones
), or dashes (-), but the first character cannot be
_
UAG Series User's Guide
398