Add Application Group Rule - ZyXEL Communications UAG5100 User Manual

Table 202 Configuration > Object > Application > Application Group (continued)
LABEL
Released
Date
Update
Signatures

38.3.1 Add Application Group Rule

Click Add in Configuration > Object > Application > Application Group. Use this screen to
select already created application rules and combine them as a single new rule.
Figure 297 Configuration > Object > Application > Application > Add Application Group Rule
The following table describes the labels in this screen.
Table 203 Configuration > Object > Application > Application > Add Application Group Rule
LABEL
Name
Description
Member List
OK
Cancel
Chapter 38 Application
DESCRIPTION
This field shows the date (YYYY-MM-DD) and time the current signature version was
released.
If your signature set is not the most recent, click this to go to Configuration > Licensing
> Signature Update > IDP / AppPatrol to update your signatures.
DESCRIPTION
Enter a name for the group. You may use 1-31 alphanumeric characters, underscores(
or dashes (-), but the first character cannot be a number. This value is case-sensitive.
This field displays the description of each group, if any. You can use up to 60 characters,
punctuation marks, and spaces.
The Member list displays the names of the application and application group objects that
have been added to the application group. The order of members is not important.
Select items from the Available list that you want to be members and move them to the
Member list. You can double-click a single entry to move it or use the [Shift] or [Ctrl] key
to select multiple entries and use the arrow button to move them.
Move any members you do not want included to the Available list.
Click OK to save your changes back to the UAG.
Click Cancel to exit this screen without saving your changes.
UAG Series User's Guide
441
),
_