The Port Statistics Graph Screen - ZyXEL Communications UAG5100 User Manual

The following table describes the labels in this screen.
Table 21 Monitor > System Status > Port Statistics
LABEL
Poll Interval
Set Interval
Stop
Switch to
Graphic View
#
Port
Status
TxPkts
RxPkts
Collisions
Tx B/s
Rx B/s
Up Time
System Up Time

7.2.1 The Port Statistics Graph Screen

Use this screen to look at a line graph of packet statistics for each physical port. To access this
screen, click Port Statistics in the Status screen and then the Switch to Graphic View Button.
Chapter 7 Monitor
DESCRIPTION
Enter how often you want this window to be updated automatically, and click Set
Interval.
Click this to set the Poll Interval the screen uses.
Click this to stop the window from updating automatically. You can start it again by setting
the Poll Interval and clicking Set Interval.
Click this to display the port statistics as a line graph.
This field displays the port's number in the list.
This field displays the physical port number.
This field displays the current status of the physical port.
Down - The physical port is not connected.
Speed / Duplex - The physical port is connected. This field displays the port speed and
duplex setting (Full or Half).
This field displays the number of packets transmitted from the UAG on the physical port
since it was last connected.
This field displays the number of packets received by the UAG on the physical port since it
was last connected.
This field displays the number of collisions on the physical port since it was last connected.
This field displays the transmission speed, in bytes per second, on the physical port in the
one-second interval before the screen updated.
This field displays the reception speed, in bytes per second, on the physical port in the
one-second interval before the screen updated.
This field displays how long the physical port has been connected.
This field displays how long the UAG has been running since it last restarted or was turned
on.
UAG Series User's Guide
93