Dcs - ZyXEL Communications UAG5100 User Manual

Chapter 9 Wireless
Figure 104 Kicking a Connection
Connections are kicked based on either idle timeout or signal strength. The UAG first looks to
see which devices have been idle the longest, then starts kicking them in order of highest idle time.
If no connections are idle, the next criteria the UAG analyzes is signal strength. Devices with the
weakest signal strength are kicked first.

9.6 DCS

Use DCS (Dynamic Channel Selection) in an environment where are many APs and there may be
interference. DCS allows APs to automatically find a less-used channel in such an environment. Use
this screen to configure dynamic radio channel selection on managed APs. Click Configuration >
Wireless > DCS to access this screen.
UAG Series User's Guide
148