ZyXEL Communications UAG5100 User Manual page 134

You need to create an account at myZyXEL.com, register your UAG and then subscribe for
application patrol service in order to be able to download new packet inspection signatures from
myZyXEL.com (see the Registration screens). Use the Signature Update > App Patrol screen
to schedule or immediately download signatures.
• You need a valid service registration to update the App Patrol signatures.
• Schedule signature updates for a day and time when your network is least busy to minimize
disruption to your network.
• Your custom signature configurations are not over-written when you download new signatures.
Note: The UAG does not have to reboot when you upload new signatures.
Click Configuration > Licensing > Signature Update > App Patrol to display the following
screen.
Figure 93 Configuration > Licensing > Signature Update > App Patrol
The following table describes the fields in this screen.
Table 52 Configuration > Licensing > Signature Update > App Patrol
LABEL
Signature Information
Current Version
Released Date
Signature Update
Update Now
Auto Update
Chapter 8 Licensing
DESCRIPTION
The following fields display information on the current signature set that the UAG is
using.
This field displays the signature and anomaly rule set version number. This number
gets larger as the set is enhanced.
This field displays the date and time the set was released.
Use these fields to have the UAG check for new signatures at myZyXEL.com. If new
signatures are found, they are then downloaded to the UAG.
Click this button to have the UAG check for new signatures immediately. If there are
new ones, the UAG will then download them.
Select this check box to have the UAG automatically check for new signatures
regularly at the time and day specified.
You should select a time when your network is not busy for minimal interruption.
UAG Series User's Guide
134