The Ipsec Monitor Screen - ZyXEL Communications UAG5100 User Manual

The following table describes the labels in this screen.
Table 44 Monitor > VPN 1-1 Mapping > Statistics
LABEL
#
Status
User/Group
Pool Profile
Assigned/Failed/
Peak Usage

7.19 The IPSec Monitor Screen

You can use this screen to display and to manage active IPSec SAs. To access this screen, click
Monitor > VPN Monitor > IPSec. The following screen appears. Click a column's heading cell to
sort the table entries by that column's criteria. Click the heading cell again to reverse the sort order.
Figure 85 Monitor > VPN Monitor > IPSec
Each field is described in the following table.
Table 45 Monitor > VPN Monitor > IPSec
LABEL
Name
Policy
Search
Disconnect
Chapter 7 Monitor
DESCRIPTION
This field displays the rule's index number in the list.
The activate (light bulb) icon is lit when the entry is active and dimmed when the entry is
inactive.
This field displays the name of the user or user group object to which the rule is applied.
This field displays the name of the IP address pool profile to which the rule is applied.
This field displays how many times the UAG applied the rule to a user successfully or
failed to apply the rule to a user. This also shows the maximum number of times the UAG
has applied the rule to a user successfully.
DESCRIPTION
Enter the name of a IPSec SA here and click Search to find it (if it is associated). You
can use a keyword or regular expression. Use up to 30 alphanumeric and _+-
.()!$*^:?|{}[]<>/ characters. See
Enter the IP address(es) or names of the local and remote policies for an IPSec SA and
click Search to find it. You can use a keyword or regular expression. Use up to 30
alphanumeric and _+-.()!$*^:?|{}[]<>/ characters. See
more details.
Click this button to search for an IPSec SA that matches the information you specified
above.
Select an IPSec SA and click this button to disconnect it.
UAG Series User's Guide
120
Section 7.19.1 on page 121
Section 7.19.1 on page 121
for more details.
for